 |
BARREL: Insurgent Tactical 18" SPR-profile barrel made from 416R stainless steel with black Nitride finish and a rifle-length gas system. Barrel is chambered in .223 Wylde and features a
1:8 twist, 11 degree recessed target crown, and M4 feed ramps. Barrel has been Magnetic Particle Inspected (MPI) and High Pressure Tested (HPT). Sub-MOA accuracy guarantee with match grade ammunition and proper shooting techniques.
GAS BLOCK: pinned gas block made from 4140 steel with a QPQ Nitride finish. Installed with dual-set knurled tip set screws.
GAS TUBE:
Stainless steel rifle-length gas tube and features a Melonite finish for
increased heat and corrosion resistance along with a subdued appearance.
RAIL:
Insurgent Tactical's slim, free float rail machined from 6061-T6 billet aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten). Full length 12 o'clock
rail with machined rails at the 3-6-9 o'clock positions on the front of
rail. Designed with both
anti-slip and anti-rotation features. Magpul M-Lok attachment system
throughout the rail for mounting accessories. 4x QD sockets throughout the rail.
UPPER RECEIVER: Mil-Spec 7075 T-6 aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten) or Type III Class II black hardcoat anodized finish. T-marks on top rail.
LOWER RECEIVER: Mil-Spec 7075-T6 aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten) or Type III Class II black hardcoat anodized finish, beveled magwell.
BCG: Insurgent Tactical AR15/M16 Carrier manufactured from 8620 steel and
bolt from 9310 Steel. Shot Peened.
Magnetic Particle Inspected (MPI). High Pressure Tested (HPT). Properly
staked gas key to Mil-Spec standards. Grade 8 hardened fasteners.
Black extractor insert w/ O-ring.
TRIGGER: Hiperfire Designated Marksman/EDT3. Trigger is designed featuring a
“duplex” trigger bow- curved trigger for high placement or flat trigger
for low finger placement. Comes with two user-adjustable trigger weights. Rifles are installed with the ligher of the two and routinely
shows
the spring breaking around 3.5 pounds when using the flat
portion of the trigger.
BUFFER: Rifle buffer- 5.2 oz
BUFFER SPRING:
Springco "Green" chrome silicon spring: ASTM Grade A877-Certified valve
quality chrome silicon wirestock, heat treated, stress relieved, shot
peened
FURNITURE/HARDWARE: Luth-AR MBA-1 rifle stock w/ 2x Grovtec QD sockets installed Magpul K2+ rubberized pistol grip Radian Talon 45 degree ambidextrous safety Radian Raptor-LT ambidextrous charging handle 7075 billet aluminum oversized trigger guard A2 flash hider
Rifles comes packaged in our
durable, hard-plastic case which features: pre-cut Mil-Spec high density
2.2lb polyethylene foam, two layers of HDPE foam in the bottom of the
case with thick "egg foam" in the lid, six holes placed around the case
for multiple options for attaching locks, cut-outs in the foam can
accommodate the rifle with optic, 4-6 magazines, suppressor, and several
accessory slots. One Magpul PMAG is also provided.
MADE IN USA. LIFETIME WARRANTY.
Rifle weight: 7 LB 14 OZ.
For optimum performance and reliability, we recommend using brass cased ammunition only.
Must receive a copy of the FFL associated with the shipping address
before your order will ship. Please send FFL to
info@insurgenttactical.com with your order number for reference. Must
select "Business" shipping option during checkout when ordering any
product requiring FFL transfer.
Insurgent Tactical Special Purpose Rifle (SPR) Review
|
|
 |