BARREL: Insurgent Tactical 16" barrel made from 4150 Chrome Moly Vanadium (CMV) steel with QPQ Nitride finish and a mid-length gas system. Barrel is chambered in 5.56 NATO or .300 Blackout and features a 1:7 twist with M4 feed ramps. Barrels are High Pressure Tested (HPT) and Magnetic Particle Inspected (MPI). Sub-MOA accuracy guarantee with match grade ammunition and proper shooting techniques.
GAS BLOCK: pinned gas block made from 4140 steel with a QPQ Nitride finish. Installed with knurled tip set screws.
GAS TUBE: Stainless steel mid-length gas tube and features a Melonite finish for increased heat and corrosion resistance along with a subdued appearance
RAIL: Insurgent Tactical's slim, free float rail machined from 6061-T6 billet aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten). Full length 12 o'clock rail with machined rails at the 3-6-9 o'clock positions on the front of rail. Designed with both anti-slip and anti-rotation features. Magpul M-Lok attachment system throughout the rail for mounting accessories. 4x QD sockets throughout the rail.
UPPER RECEIVER: Mil-Spec 7075 T-6 aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten) or Type III Class II black hardcoat anodized finish. T-marks on top rail.
LOWER RECEIVER: Mil-Spec 7075-T6 aluminum with your choice of Cerakote (Graphite Black, Burnt Bronze, Tungsten) or Type III Class II black hardcoat anodized finish, beveled magwell
BCG: Insurgent Tactical AR15/M16 Carrier manufactured from 8620 steel and bolt from 9310 Steel. 4340 steel cam pin. Nitride finish. Shot Peened. Magnetic Particle Inspected (MPI). High Pressure Tested (HPT). Properly staked gas key to Mil-Spec standards. Grade 8 hardened fasteners. Black extractor insert w/ O-ring.
TRIGGER: ALG Defense QMS. The ALG Defense QMS trigger pull is significantly smoother than a stock trigger. This is accomplished by honing the sear surfaces smooth while not removing metal below the valleys of the stock surface finish. The majority of the associated grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is not lower than the M4/M16 minimum weight specification of 5.5 lbs.
BUFFER: Heavy "H" buffer- 3.8 oz
BUFFER SPRING: Springco "Blue" chrome silicon spring: ASTM Grade A877-Certified valve quality chrome silicon wirestock, heat treated, stress relieved, shot peened
FURNITURE/HARDWARE:
Magpul MOE carbine stock
Magpul K2+ rubberized pistol grip
Primary Weapon System (PWS) ratchet lock QD sling mount end plate and castle nut
Radian Talon 45 degree ambidextrous safety
Radian Raptor-LT ambidextrous charging handle
7075 billet aluminum oversized trigger guard
A2 flash hider
Rifles comes packaged in our durable, hard-plastic case which features: pre-cut Mil-Spec high density 2.2lb polyethylene foam, two layers of HDPE foam in the bottom of the case with thick "egg foam" in the lid, six holes placed around the case for multiple options for attaching locks, cut-outs in the foam can accommodate the rifle with optic, 4-6 magazines, suppressor, and several accessory slots. One Magpul PMAG is also provided.
MADE IN USA. LIFETIME WARRANTY.
Rifle weight: 6 LB 7 OZ.
For optimum performance and reliability, we recommend using brass cased ammunition only.
Must receive a copy of the FFL associated with the shipping address before your order will ship. Please send FFL to info@insurgenttactical.com with your order number for reference. Must select "Business" shipping option during checkout when ordering any product requiring FFL transfer.